SCANTECH ID (Champtek company) RFR100 - Manual (Page 5)

User Manual – RFR100 433MHz TCPIP Reader
5
Mechanicals
TOP View
Power LED – On when reader is powered.
TX/RX LED – On while reader is transmitting or receiving a packet.
LAN LED – Blink when there are network activities .
Ethernet – RJ-45 Ethernet jack.
Antenna – SMA connector
Power – 5Vdc
Reset Button – Hardware Reset the Reader
Network Configuration
This section will introduce how to configure the network connection of
RFR100 by utility TCPIP.exe

RFR100 default IP: 192.168.1.127

Run Network Utility “TCPIP.exe”

Homepage: