Q-Tech QT2010 - Manual

Q-TECH Corporation - 10150 W. Jefferson Boulevard, Culver City 90232 - Tel: 310-836-7900 - Fax: 310-836-2157 - www.q-tech.com
QT2010 MCXO
MICROCOMPUTER COMPENSATED CRYSTAL OSCILLATOR
3.3Vdc - 5 to 100MHz, 32.768kHz and 1PPS
QPDS-0004 (Revision B, October 2012 ) (ECO# 10690)
Q-TECH
CORPORATION
1 of 3
Description
Q-Tech’s microcomputer compensated crystal oscillator,
MCXO, uses a high stability overtone SC-cut crystal with mi-
croprocessor controlled compensation. The self-temperature
sensing resonator, using a dual-mode oscillator, virtually
eliminates thermometry related errors. As a result, all basic
TCXO and OCXO limitations are overcome or significantly
reduced in the MCXO.
Applications
• Satellite terminals
• Underwater monitors
• GPS
• Mobile equipment
ITAR Controlled
Features
• Made in the USA
• ITAR
• DFARS 252-225-7014 Compliant:
Electronic Component Exemption
• USML Registration # M17677
• Frequency Stability-Temperature: ±2 x 10 -8 from
-40ºC to +85ºC (Extended temperature range available)
• Outputs: 5 to 100MHz, 32.768kHz and 1PPS.Other
frequency options available
• DC Power Input: 3.3Vdc, 105milliwatts max
• Inputs: Mode Control
Calibration Reference Signal
Sync (optional)
• Initialization: <5 seconds from power on to full
performance
• Dual-Mode Oscillator: Specially developed for the
MCXO
• Aging Correction: Auto calibration in the field
• Environmental: Inherently rugged design capable of
full military screening
• Low Phase Noise and Jitter
• Small Form Factor
• G-Sensitivity 1PPB/G max.
For Non-Standard requirements, contact Q-Tech Corporation at
[email protected]
Frequency vs. Temperature Code:
A = ± 5ppb at 0ºC to +50ºC
B = ± 10ppb at 0ºC to +70ºC
C = ± 30ppb at -40ºC to +85ºC
D = ± 20ppb at -40ºC to +85ºC
E = ± 30ppb at -55ºC to +105ºC
F = ± 20ppb at -55ºC to +105ºC
Output Frequency
Screening Option:
Blank=No Screening
M=Per MIL-PRF-55310, Level B
Logic:
C = CMOS
S = Sine Wave
Q T 2 0 1 0 C B M - 10.000MHz
(Sample part number)
QT2010CBM-10.000MHz
3 2 5 4
6 7 8 9 10
.500
(13.46)
.250
(6.35)
.030
(0.76)
.750
(19.06)
1.000
(25.40)
.750
(19.06)
1
.25 0
(6.35)
.500
(12.70)
1.000
(25.40)
.025
(.65)
Stand off
4 places
max
Sq.
Q-TECH
QT2010
75.000MHz
D/C S/N
Pin No. Function
1 Frequency Output
2, 4, 7 N/C
3 GND / CASE
5 Vc/Fref Input
6 1PPS Output
8 Mode Select
9 Status
10 Voltage Supply
Package Material:
• .025 + .002/-.003
Cold Rolled Steel
• Bright Nickel Plated
500µ Solderable
Package Outline and Pin Connections
Dimensions are in inches (mm)
Ordering Information