Media-Tech DVB-T2 HD DIGITAL TV BOX - Manual (Page 7)

7
EN
Aerial Adjustment
1. Choose „Aerial Adjustment” menu and press “OK”.
2. Switch between „Tuner Power” – ON/OFF. When this
option is turned “On” there is +5V voltage on anten-
na socket. If you do not use aerial that requires +5V
power supply set this option to “Off ”.
Logical Channel Number
When “Logical Channel Number” option is active you
cannot change channel number manually. When it
is turned off you can assign any number to available
channel.
3. Choose channel from channel list on the menu.
Using Electronic Programme Guide (EPG)
1. Press EPG button on remote.
2. Use directional keys to explore list of available channels
3. Press GREEN button to enter „Timer Events”.
4. Press RED button to enter „Step time” menu.
Watching TV
Changing channels
You can select the channel you wish to watch in 3 ways:
1. By pressing CH- / CH+ buttons on remote.
2. Enter channel number manually by numeric keys on
remote.
Choose „Scan Band”, primary channel number „Ch
No.” and confi rm „Search” option by pressing “OK”.
Edit Channel Menu
1. Press MENU button on remote to enter main menu.
2. Use UP/DOWN keys to highlight „Edit Channel” op-
tion, next press RIGHT button to continue
3. Use UP/DOWN keys to select an item and press OK.
4. Press EXIT to leave menu.