Media-Tech HELLSTORM XQ - Manual

software automatically, please fi nd the auto ex-
ecute fi le “setup.exe”, which is located under the
directory of your CD drive and click on it, then
follow the on-screen instruction to install the
HELLSTORM XQ.
¯ Upon completing software installation, restart
your PC.
Hardware Installation
¯ Plug-in your HELLSTORM XQ connector to either
one USB Port or USB Hub of your computer and
make sure it is fi rmly connected.
¯ After the HELLSTORM XQ is connected, the
monitor will shows “Find a new hardware” and
the standard USB driver will be located for you
to fi nish the easy installation and play games im-
mediately.
¯ The system will add an item of stick in the game-
controller board automatically, and you can test
the function of gamepad buttons and vibration.
Troubleshoting
HELLSTORM XQ is properly plugged into the
USB port but does not work.
1. Please remove HELLSTORM XQ and all other
game drivers from the system and install soft-
ware drive once again. Sometimes there is a con-
fl ict between foreign drivers.
If you plug HELLSTORM XQ in to passive USB hub
and HELLSTORM XQ does not work please plug
in to active USB hub or direct USB port in your
computer.
2. Not every game requires all functioning but-
tons (12 buttons) on your HELLSTORM XQ. If you
fi nd some buttons no working inside the game,
please check the game setting again.
3. The function of the gamepad buttons may vary
in diff erent games. Before proceed with game
setting, whatever through the HELLSTORM XQ or
from the OPTION inside the game, always read
your game manual carefully to approach the
best game setting.
4. Gamepad buttons confi guration depends from
game type. Please read game manual for game
devices support.
Introduction
Thank you for choosing the HELLSTORM XQ Game-
pad. This device is an advanced game control sys-
tem designed with full ergonomics and equipped
with well-positioned buttons to ensure your game
play comfortably. Moreover it is built with two mo-
tors for actual vibration while playing games.
In order to fi t your game play, please take a moment
to read the user’s guide. This user’s guide provides
you the necessary information for easily installing
and basic operating this powerful gamepad under
Microsoft Windows XP, Vista and Windows 7.
Package Contents
Your package comes with the following items:
¯ HELLSTORM XQ gamepad
¯ Software disc
¯ User’s guide
System Requirements
¯ IBM PC 586/Pentium II compatibles or higher
¯ Available USB port or extension active USB hub
¯ CD-ROM drive
¯ Microsoft Windows XP/Vista/Win 7
Installation
Attention: Always install the software fi rst be-
fore hardware installation.
Software Installation
Disc which comes together witch HELLSTORM
XQ contains the software needed for your de-
vice setup. However, if you don’t install this
driver, HELLSTORM XQ will be operated without
vibration function.
¯ Insert driver CD disc into your CD-ROM drive and
wait for a few seconds for your computer to load
the disc.
¯ If your system is setup to automatically read a
new inserted CD, then the auto run program is
executed and the opening screen for installation
appears. Please follow the on-screen instruction
to install the drivers step-by-step.
¯ If your system doesn’t launch the installation
EN
User’s Guide Gamepad for PC Computers & PS3 Consoles
HELLSTORM XQ
MT1509