Theatre Solution Teatro Auditorium Seating - Manual (Page 35)

34 Maintenance Instructions Teatro Auditorium Seating
Maintenance Instructions
The Teatro chairs are designed and built for years of reliable service. The durability and beauty of the chair will however,
be greatly enhanced with proper care and inspection, as described below. Each project will be provided with an
Operations and Maintenance (O&M) Manual which will describe in detail the maintenance measures to be taken by onsite
personnel. For more information on the care of the veneer and fabric components of your product, please refer to the
Finishes section of the Theatre Solutions binder.
Preventative Maintenance
Inspection and Cleaning
In the first year after the original installation, it is recommended that the chairs be inspected quarterly to insure that all
chairs remain secure to the floor, and that the seats and backs remain tight to the leg frames. After the first year, this
inspection interval can become longer, but should never exceed 6 months.
Lubrication
There are no components in the Teatro chair which require lubrication. Seat pivot hinges include a nylon bushing to
insure silent and consistent performance.
Periodic Readjustment
Besides inspecting for loose screw attachments, there should not be any routine need for readjustment. If, however,
a loose connection is discovered, please refer to the appropriate drawing and instructions for installing the subject
component. These drawings and instructions can be found in the O&M Manual.
Corrective Maintenance
The Teatro chair has been designed and tested to achieve optimum performance and durability. In general, onsite
maintenance personnel can provide the appropriate service to correct problems if they have the necessary spare
parts and installation instructions.
Troubleshooting
In the event that a problem with the performance or finish of the chair occurs, it is often possible for immediate on-site
remedies. TSI recommends that any loose component should be inspected for any visible evidence of breakage. If
evidence is found, the part should be immediately replaced. If there is no evidence of breakage, the attachment
hardware should be checked to insure tightness.
Obtaining Replacement Parts
A complete list of spare parts provided with the original installation is included in the O&M Manual. If any additional
parts are required, simply contact Theatre Solutions and refer to the appropriate part number or the description listed
in a drawing depicting the component.
Service Calls
For service work which cannot be executed by building user, contact Theatre Solutions and we will assist in arranging
for a visit by qualified technicians.
Shipping Back to Theatre Solutions
Prior to returning any component part(s) to Theatre Solutions, please contact us by phone or fax for instructions on
packaging and shipment method.