GE Industrial Solutions Austin Superlynx II SIP - Manual

Data Sheet
October 2, 2009
Austin Superlynx TM II SIP Non-isolated Power Modules:
2.4Vdc – 5.5Vdc input; 0.75Vdc to 3.3Vdc Output; 16A Output Current
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS04-020 ver. 1.22
PDF name: superlynx_II_sip_ds.pdf
Applications
ƒ Distributed power architectures
ƒ Intermediate bus voltage applications
ƒ Telecommunications equipment
ƒ Servers and storage applications
ƒ Networking equipment
Features
ƒ Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
ƒ Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
ƒ Flexible output voltage sequencing EZ-SEQUENCE
ƒ Delivers up to 16A of output current
ƒ High efficiency – 95% at 3.3V full load (V
IN
= 5.0V)
ƒ Small size and low profile:
50.8 mm x 12.7 mm x 8.1 mm
(2.0 in x 0.5 in x 0.32 in)
ƒ Low output ripple and noise
ƒ Constant switching frequency (300KHz)
ƒ High Reliability:
Calculated MTBF > 11.12 M hours at 25 o C Full-load
ƒ Programmable Output voltage programmable
ƒ Line Regulation: 0.3% (typical)
ƒ Load Regulation: 0.4% (typical)
ƒ Temperature Regulation: 0.4% (typical)
ƒ Remote On/Off
ƒ Remote Sense
ƒ Output overcurrent protection (non-latching)
ƒ Overtemperature protection
ƒ Wide operating temperature range (-40°C to 85°C)
ƒ UL* 60950-1Recognized, CSA † C22.2 No. 60950-1-
03 Certified, and VDE ‡ 0805:2001-12 (EN60950-1)
Licensed
ƒ ISO** 9001 and ISO 14001 certified manufacturing
facilities
Description
Austin SuperLynx TM II SIP power modules are non-isolated dc-dc converters that can deliver up to 16A of output
current with full load efficiency of 95% at 3.3V output. These modules provide a precisely regulated output voltage
programmable via external resistor from 0.75Vdc to 3.3Vdc over a wide range of input voltage (V
IN
= 2.4 – 5.5Vdc).
Austin SuperLynx TM II has a sequencing feature, EZ-SEQUENCE TM that enable designers to implement various
types of output voltage sequencing when powering multiple modules on board. Their open-frame construction and
small footprint enable designers to develop cost- and space-efficient solutions. In addition to sequencing, standard
features include remote On/Off, remote sense, programmable output voltage, over current and over temperature
protection.
RoHS Compliant
EZ-SEQUENCE TM