GE Industrial Solutions EntelliGuard G Back Connected Terminations for Cassette Envelope 2 – 3000A UL User Manual
Page 2
6. Assemble remaining terminal assemblies similarly
on all poles so as to populate as 3pole / 4 pole
breaker fig C & D.
7. The bus bars to be supported within 200mm
distance and tightened to 80Nm (59 ft-lbs) torque
Fig C, Envelope 2 , 3000A UL 3 Pole
Heat Sink LH
(with clearance hole)
Heat Sink RH
(with tapping)
M6 Hardware
8Nm torque
Heat Sink LH
(with clearance hole)
Heat Sink RH
(with tapping)
M6 Hardware
8Nm torque
Fig D, Envelope 2 , 3000A UL 4 Pole
Fig B. Heat sink assembly to terminal assembly for 3000
Amperes (UL)
These instructions do not purport to cover all details or variations in equipment nor, to provide contingency to be met in connection
with installation, operation, or maintenance. Should further information be desired, or should particular problems arise which are not
covered sufficiently for the purchaser’s purposes, the matter should be referred to GE.
GE
41 Woodford Ave, Plainville, CT 06062
www.geelectrical.com
© 2009 General Electric Company
2
DEH-41433 R1 (04/09)