GE Industrial Solutions Austin Microlynx II SIP - Manual

Data Sheet
October 2, 2009
Austin Microlynx TM II SIP Non-isolated Power Modules:
2.4Vdc – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 6A Output Current
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS04-024 ver. 1.23
PDF name: microlynx_II_sip_ds.pdf
Applications
ƒ Distributed power architectures
ƒ Intermediate bus voltage applications
ƒ Telecommunications equipment
ƒ Servers and storage applications
ƒ Networking equipment
ƒ Enterprise Networks
ƒ Latest generation IC’s (DSP, FPGA, ASIC) and
Microprocessor powered applications
Features
ƒ Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
ƒ Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
ƒ Flexible output voltage sequencing EZ-
SEQUENCE
TM
ƒ Delivers up to 6A output current
ƒ High efficiency – 96% at 3.3V full load (V
IN
= 5.0V)
ƒ Small size and low profile:
25.4 mm x 12.7mm x 6.68 mm
(1.00 in x 0. 5 in x 0.263 in)
ƒ Low output ripple and noise
ƒ High Reliability:
Calculated MTBF = 12.8M hours at 25 o C Full-load
ƒ Programmable Output voltage
ƒ Line Regulation: 0.3% (typical)
ƒ Load Regulation: 0.4% (typical)
ƒ Temperature Regulation: 0.4 % (typical)
ƒ Remote On/Off
ƒ Output overcurrent protection (non-latching)
ƒ Wide operating temperature range (-40°C to 85°C)
ƒ UL* 60950-1Recognized, CSA † C22.2 No.
60950-1-03 Certified, and VDE ‡ 0805:2001-12
(EN60950-1) Licensed
ƒ ISO** 9001 and ISO 14001 certified manufacturing
facilities
Description
Austin MicroLynx TM II SIP power modules are non-isolated dc-dc converters that can deliver up to 6A of output
current with full load efficiency of 96.0% at 3.3V output. These modules provide a precisely regulated output voltage
programmable via an external resistor from 0.75Vdc to 3.63Vdc over a wide range of input voltage (V
IN
= 2.4 –
5.5Vdc). Austin MicroLynx TM II has a sequencing feature, EZ-SEQUENCE TM that enable designers to implement
various types of output voltage sequencing when powering multiple modules on board. Their open-frame
construction and small footprint enable designers to develop cost- and space-efficient solutions. In addition to
sequencing, standard features include remote On/Off, programmable output voltage and over current protection.
RoHS Compliant
EZ-SEQUENCE TM