GE Industrial Solutions Austin Lynx II SMT - Manual

Data Sheet
September 10, 2013
Austin Lynx TM II SMT Non-isolated Power Modules:
2.4Vdc –5.5Vdc input; 0.75Vdc to 3.63Vdc Output;10A Output Current
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS03-105 ver. 1.04
PDF name: lynx_II_smt_ds.pdf
EZ-SEQUENCE TM
Features
 Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
 Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
 Flexible output voltage sequencing EZ-
SEQUENCE
TM
 Delivers up to 10A output current
 High efficiency – 95% at 3.3V full load (V
IN
= 5.0V)
 Small size and low profile:
33.0 mm x 13.5 mm x 8.28 mm
(1.30 in x 0.53 in x 0.326 in)
 Low output ripple and noise
 High Reliability:
Calculated MTBF = 15.7M hours at 25 o C Full-load
 Constant switching frequency (300 kHz)
 Output voltage programmable from 0.75 Vdc to
3.63Vdc via external resistor
 Line Regulation: 0.3% (typical)
 Load Regulation: 0.4% (typical)
 Temperature Regulation: 0.4 % (typical)
 Remote On/Off
 Remote sense
 Output overcurrent protection (non-latching)
 Wide operating temperature range (-40°C to 85°C)
 UL* 60950-1Recognized, CSA † C22.2 No. 60950-1-
03 Certified, and VDE ‡ 0805:2001-12 (EN60950-1)
Licensed
 ISO** 9001 and ISO 14001 certified manufacturing
facilities
Applications
 Distributed power architectures
 Intermediate bus voltage applications
 Telecommunications equipment
 Servers and storage applications
 Networking equipment
 Enterprise Networks
 Latest generation IC’s (DSP, FPGA, ASIC) and
Microprocessor powered applications
Description
Austin Lynx TM II SMT (surface mount technology) power modules are non-isolated DC-DC converters that can
deliver up to 10A of output current with full load efficiency of 95% at 3.3V output. These modules provide a
precisely regulated output voltage programmable via an external resistor from 0.75Vdc to 3.63Vdc over a wide
range of input voltage (V
IN
= 2.4 – 5.5Vdc). The Austin Lynx TM II series has a sequencing feature, EZ-
SEQUENCE TM that enable designers to implement various types of output voltage sequencing when powering
multiple voltages on a board.
RoHS Compliant