Preparation of the drive for installation – GE Industrial Solutions AF-650 GP Top & Bottom Cover Duct Kit - NEMA 3R User Manual
Page 3
Advertising
Instruction No: 177R0109 V1
May 7, 2009
Page 3
Preparation of the Drive for Installation
Remove 7 torx screws on the top of drive.
See Figure 4.
Install the top duct cover plate as shown
in Figure 5 using the new 16mm, M5 torx
screws provided with the kit.
Figure 4. Screws to be removed from top of drive
Figure 5. Top cover plate installed
177R0109
July 15, 2009
DET-704, Page 3
177R0109
February 25, 2010
DET-704a, Page 3
Advertising