Recommended pad layout – GE Industrial Solutions Austin MegaLynx SMT User Manual
Page 24
Advertising
Data Sheet
September 10, 2013
Austin MegaLynx
TM
SMT: Non-Isolated DC-DC Power Modules:
4.5 – 5.5Vdc input; 0.8 to 3.63Vdc Output; 30A output current
6.0 – 14Vdc Input; 0.8Vdc to 3.63Vdc Output; 20/30A output
LINEAGE
POWER
24
Recommended Pad Layout
(ATH030A0X3-SRP/ATS030/020A0X3-SRP)
Dimensions are in millimeters and (inches).
Tolerances: x.x mm
± 0.5 mm (x.xx in. ± 0.02 in.) [unless otherwise indicated]
x.xx mm
± 0.25 mm (x.xxx in ± 0.010 in.)
Note:
For the ATH030A0X3-SR and ATS030/020A0X3-SR modules, the SHARE pin is omitted since
these modules are not capable of being paralleled.
PIN
FUNCTION
PIN
FUNCTION
1 On/Off 6 Trim
2 V
IN
7
Sense
3 SEQ 8 No
Pin
4 GND 9 Share
5 V
OUT
10 No
Pin
Advertising