GE Industrial Solutions Austin Microlynx II SMT - Manual

Data Sheet
September 10, 2013
Austin Microlynx TM II SMT Non-isolated Power Modules:
2.4Vdc – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 6A Output Current
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS03-107 ver. 1.04
PDF name: microlynx_II_smt_ds.pdf
EZ-SEQUENCE TM
Features
 Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
 Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
 Flexible output voltage sequencing EZ-
SEQUENCE
TM
 Delivers up to 6A output current
 High efficiency – 96% at 3.3V full load (V
IN
= 5.0V)
 Small size and low profile:
27.9 mm x 11.4 mm x 7.24 mm
(1.10 in x 0.45 in x 0.285 in)
 Low output ripple and noise
 High Reliability:
Calculated MTBF = 12.8M hours at 25 o C Full-load
 Output voltage programmable from 0.75 Vdc to
3.63Vdc via external resistor
 Line Regulation: 0.3% (typical)
 Load Regulation: 0.4% (typical)
 Temperature Regulation: 0.4 % (typical)
 Remote On/Off
 Output overcurrent protection (non-latching)
 Wide operating temperature range (-40°C to 85°C)
 UL* 60950-1Recognized, CSA † C22.2 No.
60950-1-03 Certified, and VDE ‡ 0805:2001-12
(EN60950-1) Licensed
 ISO** 9001 and ISO 14001 certified manufacturing
facilities
Applications
 Distributed power architectures
 Intermediate bus voltage applications
 Telecommunications equipment
 Servers and storage applications
 Networking equipment
 Enterprise Networks
 Latest generation IC’s (DSP, FPGA, ASIC) and
Microprocessor powered applications
Description
Austin MicroLynx TM II SMT (surface mount technology) power modules are non-isolated dc-dc converters that can
deliver up to 6A of output current with full load efficiency of 96.0% at 3.3V output. These modules provide a
precisely regulated output voltage programmable via an external resistor from 0.75Vdc to 3.63Vdc over a wide
range of input voltage (V
IN
= 2.4 – 5.5Vdc). Austin MicroLynx TM II has a sequencing feature, EZ-SEQUENCE TM that
enable designers to implement various types of output voltage sequencing when powering multiple modules on
board.
RoHS Compliant