GE Industrial Solutions Austin SuperLynx SIP - Manual (Page 5)

Data Sheet
October 2, 2009 Austin SuperLynx TM SIP Non-isolated Power Modules:
3.0 – 5.5Vdc Input; 0.75Vdc to 3.63Vdc Output; 16A output current
LINEAGE POWER 5
Feature Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature
conditions. See Feature Descriptions for additional information.
Parameter Device Symbol Min Typ Max Unit
Remote On/Off Signal interface
(V
IN
=V
IN, min
to V
IN, max
; Open collector pnp or equivalent
Compatible, Von/off signal referenced to GND
See feature description section)
Logic High
Input High Voltage (Module OFF) All V IH 1.5 ― V
IN,max
V
Input High Current All I IH ― 0.2 1 mA
Logic Low
Input Low Voltage (Module ON) All V IL -0.2 ― 0.3 V
Input Low Current All I IL ― ― 10 μA
Turn-On Delay and Rise Times
(I
O
=I
O, max ,
V
IN
= V
IN, nom,
T
A
= 25 o C, )
Case 1: On/Off input is set to Logic Low (Module
ON) and then input power is applied (delay from
instant at which V
IN
=V
IN, min
until Vo=10% of Vo,set)
All Tdelay ― 3.9 ― msec
Case 2: Input power is applied for at least one second
and then the On/Off input is set to logic Low (delay from
instant at which Von/Off=0.3V until Vo=10% of Vo, set) All Tdelay ― 3.9 ― msec
Output voltage Rise time (time for Vo to rise from 10%
of V
o,set to 90% of Vo, set)
All Trise ― 4.2 8.5 msec
Output voltage overshoot – Startup ― 1 % V
O, set
I
O
= I
O, max
; V
IN
= 3.0 to 5.5Vdc, T
A
= 25 o C
Remote Sense Range ― ― 0.5 V
Overtemperature Protection All T
ref
⎯ 125 ⎯ °C
(See Thermal Consideration section)
Input Undervoltage Lockout
Turn-on Threshold All 2.2 V
Turn-off Threshold All 2.0 V