GE Industrial Solutions Austin SuperLynx II SMT - Manual

Data Sheet
September 10, 2013
Austin SuperLynx TM II SMT Non-isolated Power Modules:
2.4Vdc – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 16A Output Current
* UL is a registered trademark of Underwriters Laboratories, Inc.
†
CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS03-109 ver. 1.03
PDF name: superlynx_II_smt_ds.pdf
Features
 Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
 Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
 Flexible output voltage sequencing EZ-SEQUENCE
 Delivers up to 16A of output current
 High efficiency – 95% at 3.3V full load (V
IN
= 5.0V)
 Small size and low profile:
33.00 mm x 13.46 mm x 8.28 mm
(1.300 in x 0.530 in x 0.326 in)
 Low output ripple and noise
 High Reliability:
Calculated MTBF > 11.12 M hours at 25 o C Full-load
 Output voltage programmable from 0.75 Vdc to
3.63Vdc via external resistor
 Line Regulation: 0.3% (typical)
 Load Regulation: 0.4% (typical)
 Temperature Regulation: 0.4% (typical)
 Remote On/Off
 Remote Sense
 Output overcurrent protection (non-latching)
 Overtemperature protection
 Wide operating temperature range (-40°C to 85°C)
 UL* 60950-1Recognized, CSA † C22.2 No. 60950-1-
03 Certified, and VDE ‡ 0805:2001-12 (EN60950-1)
Licensed
 ISO** 9001 and ISO 14001 certified manufacturing
facilities
Applications
 Distributed power architectures
 Intermediate bus voltage applications
 Telecommunications equipment
 Servers and storage applications
 Networking equipment
Description
Austin SuperLynx TM II SMT (surface mount technology) power modules are non-isolated dc-dc converters that can
deliver up to 16A of output current with full load efficiency of 95% at 3.3V output. These modules provide a
precisely regulated output voltage programmable via external resistor from 0.75Vdc to 3.63Vdc over a wide range of
input voltage (V
IN
= 2.4 – 5.5Vdc). Austin SuperLynx TM II has a sequencing feature, EZ-SEQUENCE TM that enable
designers to implement various types of output voltage sequencing when powering multiple modules on board.
Their open-frame construction and small footprint enable designers to develop cost- and space-efficient solutions.
In addition to sequencing, standard features include remote On/Off, remote sense, programmable output voltage,
over current and over temperature protection.
RoHS Compliant
EZ-SEQUENCE TM