GE Industrial Solutions WattStation Connect Reference Guide for the Install - Manual (Page 18)

WattStation TM Connect Reference Guide
18 ©2012 GE Company All Rights Reserved GE Energy
How do I provision the WattStation through my mobile app?
To provision the charging station using your mobile app, you need
to first scan the QR Code and then apply provisioning details for the
WattStation.
NOTE: You can only provision the WattStation after you have
completed configuring the hardware.
Scanning the QR code
After you have successfully logged on to WattStation Connect on
your iPhone, the Scan screen displays, prompting you to scan the
QR code on top of the WattStation.
1. Hold your phone over the QR code and tap Start Scan on the
screen.
2. Adjust the displayed frame to allow the phone’s camera lens to
focus on the QR code.