GE Industrial Solutions CAR1212FP series - Manual

GE Energy Data Sheet
July 20, 2012 ©2012 General Electric Company. All rights reserved.
CAR1212FP series rectifier
Input: 85Vac to 264Vac; Output: 12Vdc @ 1250W; 5 Vdc @ 0.5A
Features
 Universal input with PFC
 Constant power characteristic
 3 front panel LEDs:
 Remote ON/OFF control of the 12Vdc output
 Remote sense on the 12Vdc output
 No minimum load requirements
 Active load sharing (single wire)
 Hot Plug-ability
 Efficiency: typically 89% at high line
85% at low line
 Standby : 5Vdc
 Auto recoverable OC & OT protection
 Operating temperature: -10 - 70C (de-rated above
50C)
 Digital status & control: I 2 C serial bus
 EN/IEC/UL60950-1 2 nd edition; UL, CSA and VDE
 EMI: class A FCC docket 20780 part 15, EN55022
 Meets EN6100 immunity and transient standards
 Shock & vibration: NEBS GR-63-CORE, level 3
Applications

12Vdc distributed power architectures

Datacom and Telecom applications

Mid to high-end Servers

Enterprise Networking

Network Attached Storage

Telecom Access Nodes

Routers/Switches

Broadband Switches

ATE Equipment
Description
The CAR1212FP series of rectifiers provide highly efficient isolated power from world-wide commercial AC mains.
Offered in the industry standard compact 1U form factor, these rectifiers complement the CAR1212DC converter line,
providing comprehensive solutions for systems connected either to commercial ac mains or 48/60Vdc power plants.
This plug and play approach, between AC and DC input units, has significant advantages since systems can be readily
reconfigured by simply replacing the power supply.
The high-density, front-to-back airflow is designed for minimal space utilization and is highly expandable for future
growth.