GE Industrial Solutions EntelliGuard G Castell lock Kit User Manual
Page 2
4. Fix the cam with the Castell lock with the screw
and nuts provided along with the kit as shown in
fig 2.
Fig 2.
5. Fix the Lock assy on the mounting Braket as
shown in fig 3.
Fig 3.
6. Fix the mounting bracket assembly in breaker
using the nuts provided as shown in fig 4a & 4b.
Fig 4a
Fig 4b
7. Using the supplied screws fit the cover onto
the Fascia
8. To reinstall the Fascia, rotate the charging
handle down and slide the fascia over the handle
to assemble the front cover to housing as shown
in Fig. 5.
9. Ensure the fascia is aligned properly with the
trip unit and the pad lock features of the breaker
10. Fasten the 6 mounting screws of fascia with
the housing using a pozidrive screwdriver. Apply
torque of 6 Nm (4.42 ft-lbs).
Fixing nut
Nut
Screw
Washer
Washer
Cam
Fixing nut
Screw
Washer
Washer
Nut
2