GE Industrial Solutions GT Series UPS (UL Listed) 208V system PDU - Manual (Page 5)

202 00021 01 4 User manual rev date 8-16--05
2.1 Package contents
The packing box contains a 208V PDU, and this manual. Carefully inspect the packing box and
its contents. If any damage is visible please immediately notify the carrier and/or dealer.
2.2 Location
Please refer to section 1.3 of
‘IMPORTANT SAFETY INSTRUCTIONS’
2.3 Rear panel
1 120VAC Output Breaker
Over-current Protection Breaker for
120VAC, L5-15 Output Receptacles
(10 Amp)
2 120VAC Output Receptacles
120VAC L5-15 Output Receptacles
to Connect 120VAC Load to PDU
4 208VAC Output Receptacles
208VAC L6-xxR Output Receptacles
to Connect 208VAC Load to PDU.
(L6-20R Output Receptacle = 20
Amp; L6-30R Output Receptacle =
30 Amp)
3 208VAC Input Breaker
Over-current Protection Breaker for
208VAC Input (L6-20P Input Plug =
20 Amp; L6-30P Input Plug = 30
Amp) 5 208VAC Input Cord
208VAC L6-xxP Input Cord to
Connect 208VAC Input from the
UPS. (L6-20P Input Plug for L6-20
PDU; L6-30P Input Plug for L6-30
PDU)
2 - Installation
Fig. 2.1 Rear panel
PDU620T and PDU630T
1
2
3
4
5
PDU620T and PDU630T
1
2
3
4
5
1
2
3
4
5