GE Industrial Solutions EntelliGuard Messenger iButton Replacement Guide - Manual (Page 8)

Entellisys™ Low Voltage Switchgear EntelliGuard™ Messenger iButton Replacement Guide 8
22. Rack the circuit breaker into the connected position. Verify the Breaker Status screen indicates
that the circuit breaker racking position is in and the Secondary Disconnect Position is connected.
23. Take the equipment out of Reduced Let-Thru Mode by logging into the HMI under an account with
Administrative privilege.
a. On the MAIN MENU, click Reduced Let-Thru Mode.
b. On the Reduced Let-Thru Mode dialog box, click the enabled checkbox to clear it.
c. Click OK.