GE Industrial Solutions SSTW001A3B Barracuda Series User Manual

Data sheet, Rohs compliant, Features

Advertising
background image

GE

Data Sheet

March 26, 2013

©2012 General Electric Company. All rights reserved.

Page 1

SSTW001A3B Barracuda™ Series; DC-DC Converter Power Modules

36-75Vdc Input; 12Vdc, 1.3A, 15W Output

Features

Compliant to RoHS II EU “Directive 2011/65/EU (-Z versions)

Compliant to REACH Directive (EC) No 1907/2006

Ultra-wide Input Voltage Range, 36V

dc

to 75Vdc

No minimum load

High efficiency – 87.5% at full load (V

IN

=48Vdc)

Constant switching frequency

Low output ripple and noise

Small Size and low profile, follows industry standard 1x1
footprint

27.9mm x 24.4mm x 8.5mm (MAX)

(1.10 x 0.96 x 0.335 in)

Surface mount (SMT) or Through hole (TH)

Reflow process compliant, both SMT and TH versions

Positive Remote On/Off logic

Output overcurrent/voltage protection (hiccup)

Over-temperature protection

Output Voltage adjust: 90% to 110% of V

o,nom

Wide operating temperature range (-40°C to 85°C)

UL*Recognized to UL60950-1, CAN/CSA† C22.2 No.60950-1,
and EN60950-1(VDE ‡ 0805-1) Licensed

CE mark meets 2006/95/EC directive§

Meets the voltage and current requirements for ETSI 300-
132-2 and complies with and licensed for Basic insulation
rating per EN60950-1

2250 Vdc Isolation tested in compliance with IEEE 802.3¤
PoE standards

ISO** 9001 and ISO 14001 certified manufacturing facilities


Applications

Wireless Networks

Hybrid power architectures

Optical and Access Network Equipment

Enterprise Networks including Power over Ethernet (PoE)

Industrial markets

Options

Negative Remote On/Off logic

Surface Mount/Tape and Reel (-SR Suffix)

Description

The SSTW001A3B Barracuda™ series power modules are isolated dc-dc converters that operate over an ultra-wide input voltage
range of 36Vdc -75Vdc and provide a single precisely regulated output voltage at 12Vdc. This series is a low cost, smaller size
alternative to the existing LW/LAW/LC/SC/SW with enhanced performance parameters. The output is fully isolated from the input,
allowing versatile polarity configurations and grounding connections. The modules exhibit high efficiency of 87.5% typical at full
load. Built-in filtering for both input and output minimizes the need for external filtering. The module is fully self-protected with

output over-current and over-voltage, over-temperature and input under voltage shutdown control. Optional features include
negative or positive on/off logic and SMT connections.

*

UL

is a registered trademark of Underwriters Laboratories, Inc.

CSA

is a registered trademark of Canadian Standards Association.

VDE

is a trademark of Verband Deutscher Elektrotechniker e.V.

§ This product is intended for integration into end-user equipment . All of the required procedures of end-use equipment should be followed.
¤ IEEE and 802 are registered trademarks of the Institute of Electrical and Electronics Engineers, Incorporated.
** ISO is a registered trademark of the International Organization of Standards.

RoHS Compliant

Advertising