Canon PowerShot S30 - Manual (Page 133)

Image Transfer Settings (DPOF Transfer Order) 131
3 Select images for transferring.
Single Images
• Select an image using B or A on the
multicontroller and mark or remove marks from
images using C or D on the multicontroller.
• You can use the same procedures to select images in
index replay (3 images). Press the button to
switch between single replay and index replay.
All the Images on a CF Card
• Press the
button to switch to index replay (three
images). Then press , and select [Mark All]
using C or D on the multicontroller and press
again. (If you select [Clear All] instead of [Mark
All], you can remove marks from all the images.)
• You can mark or remove a mark from each
image after marking or removing marks from all
the images.
4 Press the button.
• The selection mode will turn off and the Transfer Order menu will reappear.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• Images are transferred in order from oldest to newest by the shooting date.
• A maximum of 998 images can be marked per CF card.
• Transfer settings can also be assigned to images with the supplied software
programs on a computer.