Canon PowerShot S30 - Manual (Page 116)

114 Printing with Card Photo Printer CP-10 (Optional)
Printing
An image can be printed when displayed in single replay or selected in index replay.
1
Choose an image using B or A on the multicontroller and
press
.
2
Set the number of prints, the print style and cropping settings
as required.
• Selecting the number of copies (p. 115)
• Setting the Print Style (p. 115)
• Trimming (Printing a Portion of an image) (p. 117)
3
Choose [Print] using C, D, B or A on the
multicontroller and press
.
• You can also select [Print] by pressing the
button.
• The image will start to print and, when it is
completely finished, the display will revert to
standard replay mode.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• You cannot print movies or images recorded in the RAW format.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Cancel Printing
• To cancel printing between images printed, press . A confirmation dialog
appears. Select [OK] using B or A on the multicontroller and press .
• A print in progress cannot be stopped. Wait until the current image is printed and
then cancel before the next one starts. The display will revert to standard replay
mode.
Printing Errors
• An error message appears if an error occurs for some reason during the printing
process (p. 149). Select [Stop] or [Resume] using B or A on the multicontroller
and press
.
• The [Resume] option may not appear with some error messages. Select the [Stop]
option in that case.