Macro mode, Press the button to turn the lcd monitor on, Press the button – Canon PowerShot S30 User Manual

Page 59: Shoot the image, Shooting - letting the camera select settings

Advertising
background image

Shooting - Letting the Camera Select Settings

57

Macro Mode

Use the macro mode to shoot close-ups of subjects in the range of 10 to 80 cm
(3.9 in. to 2.7 ft.) at maximum wide angle and 30 to 80 cm (1.0 ft. to 2.7 ft.) at
maximum telephoto.

1

Press the

button to turn the LCD monitor on.

2

Press the button.

• The icon appears on the LCD monitor.
• Press the button again to cancel the macro

mode.

3

Shoot the image.

• The indicator beside the viewfinder will shine yellow when the shutter

button is pressed halfway.

• Shooting procedures are the same as for the

Auto Mode (p. 44).

• The macro mode cannot be selected in the

and shooting modes.

• Always use the LCD monitor to compose images in macro mode. Shooting with

the viewfinder is possible, though, the parallax phenomenon (p. 36) may cause
images composed with the optical viewfinder to be off-center.

• When the lens is zoomed out to the maximum wide angle, the recordable area is

approximately 108

× 80 mm (4.25 in. × 3.15 in.) at the closest focal distance, and

at maximum telephoto, it is approximately 111

× 83 mm (4.37 in. × 3.27 in.).

• Use of the built-in flash may not provide an appropriate amount of light.
• Turning the camera off cancels the setting.

Advertising
This manual is related to the following products: