GE Industrial Solutions KHHD004A2B Hammerhead Series - Manual

GE Data Sheet
April 1, 2013 ©2012 General Electric Company. All rights reserved. Page 1
KHHD004A2B Hammerhead™ Series; DC-DC Converter Power Modules
18-75Vdc Input; 12Vdc, 4.2A, 50W Output
Features
 Compliant to RoHS II EU “Directive 2011/65/EU (-Z versions)
 Compliant to REACH Directive (EC) No 1907/2006
 Compliant to IPC-9592A (September2008), Category 2, Class II
 Ultra-wide Input Voltage Range, 18V
dc
to 75V
dc
 No minimum load
 High efficiency – 90% at full load (V
IN
=48V
dc
)
 Constant switching frequency
 Low output ripple and noise
 Small Size and low profile, follows DOSA standard 1/16th
footprint
33.0 mm x 22.9 mm x 9.3 mm
(1.30 in x 0.9 in x 0.37 in)
 Surface mount (SMT) or Through hole (TH)
 Reflow process compliant, both SMT and TH versions
 Positive Remote On/Off logic
 Output overcurrent/voltage protection (hiccup)
 Over-temperature protection
 Output Voltage adjust: 80% to 110% of V
o,nom
 Wide operating temperature range (-40°C to 85°C)
 ANSI/ UL * 60950-1-2011 Recognized, CAN/CSA † C22.2
No.60950-1-07, Second Edition + A1:2011 (MOD) Certified IEC
60950-1:2005 (2nd edition) + A1:2009 and EN 60950-1:2006
+A11:2009 +A1:2010 +A12:2011, and VDE
‡ 0805 (EN60950-1
3rd edition) Licensed
 CE mark meets 2006/95/EC directive §
 Meets the voltage and current requirements for ETSI 300-
132-2 and complies with and licensed for Basic insulation
rating per EN60950-1
 2250 Vdc Isolation tested in compliance with IEEE 802.3 ¤ PoE
standards
 ISO** 9001 and ISO 14001 certified manufacturing facilities
Applications
 Wireless Networks
 Hybrid power architectures
 Optical and Access Network Equipment
 Enterprise Networks including Power over Ethernet (PoE)
 Industrial markets
Options
 Negative Remote On/Off logic (preferred)
 Surface Mount/Tape and Reel (-SR Suffix)
 Auto-restart Over current/Over voltage protections
(preferred)
 Shorter through hole pin trim
Description
The KHHD004A2B series power modules are isolated DOSA compliant 1/16 th brick dc-dc converters that operate over an ultra-
wide input voltage range of 18 V
dc
-75V
dc
and provide a single precisely regulated output voltage at 12V
dc
. The output is fully
isolated from the input, allowing versatile polarity configurations and grounding connections. The modules exhibit high efficiency
of 90% typical at full load. Built-in filtering for both input and output minimizes the need for external filtering. The module is fully
self-protected with output over-current and over-voltage, over-temperature and input under voltage shutdown control. Optional
features include negative or positive on/off logic and SMT connections.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
§ This product is intended for integration into end-user equipment. All of the required procedures of end-use equipment should be followed.
¤ IEEE and 802 are registered trademarks of the Institute of Electrical and Electronics Engineers, Incorporated.
** ISO is a registered trademark of the International Organization of Standards.
RoHS Compliant