Wpegrrmodlf – GE Industrial Solutions Remote Racking Operator - Low Voltage WavePro and EntelliGuard Circuit Breakers User Manual
Page 7
Advertising
Section 4. Modifications
4-1 Converting Large Frame Breaker to work with Remote Racker
1- Connecting Bracket – Align 1
st
to existing
holes in breaker frame.
2,3,4,5 – ¼ -20 Bolt, Nut and Washers – Add
¼ in ch hardware to existing hole of bracket 1
and frame in upper position as shown.
6,7,8,10 – 3/8-16 Bolt, Nut and Washer – Add
3/8 hardware to existing hole in bracket 1 and
breaker frame in lower position as shown.
9 – Racking Stop – Align racking
stop 9 with existing hole in
breaker frame as shown.
10 – 3/8-16 Bolt – Add 3/8
hardware from inside frame of
breaker as shown.
WPEGRRMODLF
Modification Kit for
32, 40, 50 Large Frame
Wave Pro Breakers
Advertising