GE Industrial Solutions JRCW016A0R Orca Series User Manual

Jrcw016a0r orca, Series; dc-dc, Converter power modules

Advertising
background image

GE

Data Sheet

November 20, 2013

©2012 General Electric Company. All rights reserved.

Page 1

JRCW016A0R Orca

*

Series; DC-DC

Converter Power Modules

36–75 Vdc Input; 28Vdc Output; 16Adc Output


Features

Compliant to RoHS II EU Directive 2011/65/EC (-Z versions)

Compliant to REACH Directive (EC) No 1907/2006

High power density: 166 W/in

3

Very high efficiency: >93.5% Typ at Full Load

Industry standard half-brick pin-out

Low output ripple and noise

Industry standard, DOSA compliant half-brick footprint

57.7mm x 60.7mm x 12.7mm
(2.27” x 2.39” x 0.5”)

Remote Sense

2:1 input voltage range

Single tightly regulated output

Constant switching frequency

Constant Current Overcurrent limit

Latch after short circuit fault shutdown

Over temperature protection auto restart

Output voltage adjustment trim, 16.0V

dc

to 35.2V

dc

Wide operating case temperature range (-40°C to 100°C)

CE mark meets 2006/95/EC directives

§

ANSI/UL

#

60950-1, 2nd Ed. Recognized, CSA

C22.2 No. 60950-

1-07 Certified, and VDE

0805-1 (EN60950-1, 2nd Ed.) Licensed

ISO

**

9001 and ISO 14001 certified manufacturing facilities

Compliant to IPC-9592A, Category 2, Class II

Applications

RF Power Amplifier

Wireless Networks

Switching Networks

Options

Output OCP/OVP auto restart

Shorter pins

Unthreaded heatsink holes

Tunable Loop* for transient response optimization

Description

The JRCW016A0R Orca series of dc-dc converters are a new generation of isolated, very high efficiency DC/DC power modules
providing up to up to 16Adc output current at a nominal output voltage of 28Vdc in an industry standard, DOSA compliant half-
brick size footprint, which makes it an ideal choice for high voltage and high power applications. Threaded-through holes are
provided to allow easy mounting or addition of a heatsink for high-temperature applications. The output is fully isolated from the
input, allowing versatile polarity configurations and grounding connections. This module contains an optional new feature, the
Tunable Loop, that allows the user to optimize the dynamic response of the converter to match the load with reduced amount of

output capacitance, leading to savings on cost and PWB area.

*

Trademark of General Electric Company

#

UL is a registered trademark of Underwriters Laboratories, Inc.

CSA is a registered trademark of Canadian Standards Association.

VDE is a trademark of Verband Deutscher Elektrotechniker e.V.

** ISO is a registered trademark of the International Organization of Standards

RoHS Compliant

Advertising