GC EUROPE GRADIA gum shades - Manual (Page 6)

8
GC GRADIA gum shades
Layering
Diagram
–
Gingiva Build-up
Bonding systems used in connection with GRADIA and GRADIA gum shades
• METALPRIMER II is applied on metal surfaces for bonding of metal/composite interface.
• COMPOSITE PRIMER is used to recreate the inhibition layer prior to additional composite placement.
• CERAMIC PRIMER is used for bonding of ceramic/composite interface.
Basic Build-up (using a “Gum Block”)
Multi-layered build-up (using a “Gum Block*”) Individual and creative technique using various gum pastes, modifiers and fibers.
GM30 A Gum Block* is built up step by step using GRADIA gum shades G20*.
G20* The Gum Block is pre-cured separetely and fixed with a thin layer
of Gum Modifier*.
GO11 – GO13* 2-shade mix of Gum Opaque.
G21 – G24* 2-shade mix of Gum Body.
* see notes p. 3 and p. 13
GM30 A Gum Block is built up step by step using GRADIA gum shades G20.
G20* The Gum Block is pre-cured separately and fixed with a thin layer
of Gum Modifier.
GOM51 Gum Opaque Modifier.
GO11-GO13* 2-shade mix of Gum Opaque.
G21-G24* 2-shade mix of Gum Body.
GF71 Gum Fiber.
GM35 Gum Modifier for reproduction of bone tissue shining through the gingiva.
GM36 Gum Modifier for more intensive red shading of tissue.
GT41 or GM30* The mixture is applied as a final cover over the total gum area,
to give the tissue a slightly softer shade.
Each step is repeatedly pre-cured according to the curing chart.
* GRADIA gum shades pastes can be applied as a single shade,
or can be mixed.
(for more details please refer to: Step by Step-Procedure)
* see notes p. 3 and p. 15