Net Optics 10_100_1000 Bypass Switch - Manual (Page 9)

5
10/100/1000 Bypass Switch
Connecting to the In-line Device
1 . Connect Monitoring Port A to the in-line device using a CAT5/CAT5e
cable .
2 . Connect Monitoring Port B to the in-line device using a CAT5/CAT5e
cable .
3 . Verify that the Monitoring Ports are cabled in-line between two devices .
Figure 3: Connecting to the In-line Device
A B A B
Network Control
Monitor
Bypass Switch
10/100/1000
www.netoptics.com
®
To monitoring device B NIC
To monitoring device A NIC