Asus V3-M2NC61P - Manual (Page 90)

5-22 Chapter 5: BIOS setup
Channel Interleaving [Auto]
Allows you to enable or disable channel memory interleaving.
Configuration options: [Disabled] [Auto] [Address bits 6] [Address bits 12]
[Hash*, XOR of Address bits [20:16, 6] [Hash* XOR of Address bits [20:16, 9]
Enable Clock to All DIMMs [Disabled]
Allows you to enable or disable the Unused Clocks to DIMMs Even Memory
Slots are not populated. Configuration options: [Disabled] [Enabled]
MemCLK Tristate C3/ATLVID [Disabled]
Allows you to enable or disable the MemCLK Tri-Stating during C3 and Alt VID.
Configuration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Allows you to enable or disable the Memory Remapping Around Memory
Hole.Configuration options: [Disabled] [Enabled]
Unganged Mode support [Enabled]
Allows you to enable or disable the Force Unganged mode.
Configuration options: [Disabled] [Enabled]
Power Down Enable [Enabled]
Allows DIMMs to enter power down mode by deasserting the clock enable
signal when DIMMs are not in use.
Configuration options: [Enabled] [Disabled]
Power Down Mode [Channel]
Configuration options: [Channel] [Chip Select]