Asus ET2001B - Manual (Page 28)

English
28 EeeTop PC ET20 Series
Using the Support DVD
The support DVD includes an image of the operating system installed on your system at the
factory. The recovery DVD provides a comprehensive recovery solution that quickly restores
your system to its original working state, provided that your hard disk drive is in good working
order. Before using the recovery DVD, copy your data files (such as Outlook PST files) to a USB
device or to a network drive and make note of any customized configuration settings (such as
network settings).
1. Start the system and press <F2> on bootup to show the POST screen. Press <F2> again to
enter the BIOS setup.
2. Set Boot Booster to [Disabled].
If you fail to see the POST screen or enter the BIOS setup by doing the instruction above, restart
the system and try pressing <F2> repeatedly on bootup.
3. Press <F10> to save the configuration and restart EeeTop PC.
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
BIOS SETUP UTILITY
Main Advanced Power Boot Tools Exit
Exit system setup
after saving the
changes.
F10 key can be used
for this operation.
←→ Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Exit Options
Exit & Save Changes
Exit & Discard Changes
Discard Changes
Load Setup Defaults
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
BIOS SETUP UTILITY
Main Advanced Power Boot Tools Exit
Enabled: Boost
BIOS POST speed.
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Boot Booster [Disabled]
Boot Settings
Boot Device Priority
Boot Settings Configuration
Boot Settings Configuration
Security
Options
Disabled
Enabled
Save configuration changes and exit now?
[Ok] [Cancel]