Asus T2-P - Manual (Page 120)

120 Chapter 5: BIOS setup
5.6.2 Removable Drives
1st ~ xxth Drive [1st Floppy Drive]
These items specify the boot sequence from the available removable drives.
The number of drives that appear on the screen depends on the the number
of devices installed in the system. Configuration options: [ xxxxx Drive]
[Disabled]
Removable Drives
1st Drive [1st Floppy Drive]
Specifies the boot
sequence from the
available devices.
5.6.3 CDROM Drives
1st ~ xxth Drive [SM-Optical Drive Name]
These items specify the boot sequence from the available optical drives. The
number of optical drives that appear on the screen depends on the the
number of devices installed in the system. The acronym before the drive
indicates the drive mode. SM indicates that the drive is set to Secondary
Master mode while SS tells that the drive is a Secondary Slave device.
Configuration options: [ xxxxx Drive] [Disabled]
CDROM Drives
1st Drive [SM-ASUS DRW-0402P/D]
2nd Drive [SS-ASUS CD-S520/A]
Specifies the boot
sequence from the
available devices.