Asus V6-P8H61ELX - Manual (Page 43)

3-5 ASUS V6-P8H61ELX
3. CPU, chassis and power fan connectors
(4-pin CPU_FAN, 3-pin CHA_FAN, 3-pin PWR_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside
the system may damage the motherboard components. These are not jumpers! DO NOT
place jumper caps on the fan connectors!
Only the 4-pin CPU fan supports the ASUS Q-Fan2 feature.
CPU_FAN
CPU
FA
N PW
M
CPU F
AN IN
CPU
FA
N PWR
GND
P8H61-M LX2
P8H61-M LX2 CPU fan connector
The S/PDIF out module is purchased separately.
4. Digital Audio connector (4-1 pin SPDIF_OUT)
This connector is for the S/PDIF audio module to allow digital sound output. Connect
one end of the S/PDIF audio cable to this connector and the other end to the S/PDIF
module.
SPDIF_OUT
+5
V
SPDIFOU
T
GND
P8H61-M LX2
P8H61-M LX2 Digital audio connector
E6787 V6-P8H61ELX Manual.indb 5 7/28/11 10:43:57 AM