Asus M2NPV-VM - Manual

M2NPV-VM user guide update
M2NPV-VM user guide update
This is an information update for the user guide that came with your motherboard
package.
IE2527
15G063660200
Special features ASUS Q-Fan 2
ASUS C.P.R (CPU Parameter Recall)
ASUS CrashFree BIOS 2
ASUS EZ Flash 2
ASUS O.C. Profile
ASUS MyLogo™
Stepless Frequency Selection (SFS) allows FSB tuning from
200 MHz to 400 MHz at 1 increment
Note:
ASUS CrashFree BIOS 2 and ASUS EZ Flash 2 only
support VGA/RGB output
M2NPV-VM specifications summary
5. CPU, Chassis, and Power Fan connectors
(4-pin CPU_FAN, 3-pin PWR_FAN, 3-pin CHA_FAN1, 3-pin CHA_FAN2)
The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or
a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the
fan connectors on the motherboard, making sure that the black wire of each
cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient air
flow inside the system may damage the motherboard components. These are
not jumpers! DO NOT place jumper caps on the fan connectors.
Only CPU Fan and Chassis Fan1 support Q-Fan 2.
(Page 1-28)
(Page ix)