Asus P1 - Manual (Page 11)

EN-11
Connection
Using the power adapter
The projector must be used with the provided power adapter. Damage caused by the
use of an incorrect adapter is not covered under the warranty.
1. Insert the plug from the power adapter into the DC IN terminal.
2. Insert the appropriate end of the power cord into the power adapter.
3. Insert the plug on the power cord into a wall outlet.
Important
• In the connections shown above, some cables may not be included with the projector
(see "Package contents" on page 8 ). They are commercially available from electronics
stores.
• The connection illustrations above are for reference only. The rear connecting jacks
available on the projector vary with each projector model.
• For detailed connection methods, see pages 12-13 .
1
2
3