Asus RS740-E7-RS24-EG - Manual (Page 56)

Chapter 2: Hardware setup 2-32
2.10 Redundant power supply module
The RS740-E7-RS24-EG server comes with one (1) 800W 80Plus Platinum Redundant
power supply. You have an option to install a second power supply module on the available
redundant power supply slot.
• Ensure that the system is turned off before removing any components.
• Discharge static electricity by touching any metal surface.
• Use the same model and type of Redundant Power supply module.
To install the second redundant power supply module:
1.
Remove the dummy cover of the redundant power
supply.
2. Prepare the second power supply
module.
Ensure to remove the plastic cover
before installing the module.
3. Carefully insert the second power
supply module all the way into the bay.
4. Press the lock (A) then push the power
supply module until it is securely seated
in place (B).
Installing the second redundant power supply module (Optional)
A
B