Asus ET2701IUTI - Manual (Page 27)

English
27 All-in-one PC ET2700 Series
Mounting to the wall
To mount your All-in-one PC to the wall, purchase an optional wall mount adapter and a wall
mount kit (VESA200 with pad and bracket). Install the wall mount components according to
the following instructions.
1
2
1. To release the stand, place the All-in-one
PC face-down first, resting the display
panel on a flat even surface. Lift the stand
upwards (1). Use a slotted screwdriver to lift
up the lower back cover (2).
3. Remove the four screws on the stand and
save for future reinstallation. Take out the
stand and put it aside.
2. Remove the upper back cover.