Asus ET1612IUTS - Manual (Page 22)

English
22 ASUS All-in-one PC ET1612I Series
Positioning your ASUS All-in-one PC
Placing on the desktop
Place your ASUS All-in-one PC on a flat surface such as a table or desk, and pull the stand open pull the stand open
until it snaps in place. Then, tilt the display panel to an angle of between 10 and 35 degrees
from an upright position.
Installing the wall mount adapter
To mount your ASUS All-in-one PC to the wall, purchase an optional wall mount adapter
(160mm x 92mm) and a wall mount kit (pad and rack). Install the wall mount adapter according
to the following instructions.
1. Remove the four screws beneath the hinge
of the stand to release the stand. Keep the
screws for future reinstallation.
0° 10° 0°
35°
-2
-1