Asus P5N-D - Manual (Page 55)

ASUS P5N-D 2-31
8. ATX power connectors
(24-pin EATXPWR, 4-pin ATX12V)
These connectors are for ATX power supply plugs. The power supply plugs
are designed to fit these connectors in only one orientation. Find the proper
orientation and push down firmly until the connectors completely fit.
P5N-D
®
+12V DC GND
+12V DC GND
P5N-D ATX power connectors
EATXPWR
+3 Volts
+3 Volts
Ground
+5 Volts
+5 Volts
Ground
Ground
Power OK
+5V Standby
+12 Volts
-5 Volts
+5 Volts
+3 Volts
-12 Volts
Ground
Ground
Ground
PSON#
Ground
+5 Volts
+12 Volts
+3 Volts
+5 Volts
Ground
ATX12V
7. CPU, chassis, power, and optional fan connectors
(4-pin CPU_FAN, 3-pin CHA_FAN1-2, 3-pin PWR_FAN)
The fan connectors support cooling fans of 1A~2.2A (26.4 W max.) at +12V.
Connect the fan cables to the fan connectors on the motherboard, making
sure that the black wire of each cable matches the ground pin of the
connector.
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air
flow inside the system may damage the motherboard components. These are
not jumpers! DO NOT place jumper caps on the fan connectors!
• Only the CPU_FAN, CHA_FAN1 and CHA_FAN2 connectors support the
ASUS Q-FAN 2 feature.
• If you install two VGA cards, we recommend that you plug the rear chassis
fan cable to the motherboard connector labeled CHA_FAN1 or CHA_FAN2
for better thermal environment.
P5N-
D ®
P5N-D Fan connectors
CPU_FAN
GND
Rotation
+12V
GND
CPU F
AN PWR
CPU F
AN IN
CPU F
AN PWM
CHA_FAN2
GN
D
Rotation
+12V
PWR_FAN
CHA_FAN1
GND
Rotation
+12V