Asus MYPAL A636 - Manual (Page 32)

26 Chapter 2
Changing the USB settings
1. Tap > Settings > Connections tab > USB Settings icon.
2. Choose a USB Interface.
• Transmission as Network Interface - lets your device function as
a network card. You can use this setting for ActiveSync.
• Transmission as Serial Interface - lets your device function as a
UART device. You can use this setting like legacy ActiveSync.
• Simulation as Card Reader - turns your device into a mass
storage unit similar to a card reader.
3. Tap Apply when done.
Changing the memory settings
To check the storage card memory:
1. Tap > Settings > System tab > Memory icon > Storage Card tab
to display the memory information for the selected storage card.
2. If you wish to free storage card memory, delete some files from the
storage card. Use the File Explorer to delete files. See “Using the File
Explorer” for information.
Changing the wakeup settings
1. Tap > Settings > Personal tab > Wakeup Source icon.
2. Check the boxes of the items to control what functions/conditions will
turn on the device’s power. Pressing any one of the function buttons on
the front panel wakes up the device.
3. Tap OK when done.
To display the memory allocation:
1. Tap > Settings > System tab > Memory icon.
2. Tap OK when done.