Asus MyPal A639 - Manual (Page 13)

Getting Started 7
Additional storage
MyPal A639 comes with the standard SD card slot. The SD card slot can
be inserted with SD or MMC memory cards. It also supports SDIO cards of
various functionalities including 802.11b/g, modem, etc.
Label
Installing and removing SD/
MMC/SDIO card
1. With the label side (usually the side with the card
manufacturer’s name) face up, and the barcode/
serial number side face down, insert the card into
the SD card slot located on top of the device.
2. Push the card all the way into the slot until it fits
completely. If properly installed, the SD or MMC
card edge aligns with the top edge of the device.
SDIO cards usually have an extended part that
protrudes over the slot edge.
3. To remove, press the card slightly until it ejects
out. You may then safely remove the card.
NOTE An SD/MMC/SDIO/ card fits only in one
orientation, and slides smoothly into the
slot if inserted correctly. DO NOT force
the card into the slot!