Removing the side cover and front panel assembly, Installing a cpu – Asus V3-P5945G User Manual

Page 4

Advertising
background image

4

Installation Manual

Removing the side cover and

front panel assembly

1. Remove the cover screws on the rear panel.

. Pull the side cover toward the rear panel until its hooks disengage

from the chassis tabs. Set the side cover aside.

3. Locate the front panel assembly hooks, then lift them until they

disengage from the chassis.

4. Swing the front panel assembly to the right, until the hinge-like tabs

on the right side of the assembly are exposed.

5. Remove the front panel assembly, then set aside.

4

1

Air duct

1





3

4

4

4

3

3

Chassis tab holes

4

Installing a CPU

To prevent damage to the

socket pins, do not remove

the PnP cap unless you are

installing a CPU.

To install a CPU:

1. Locate the CPU socket on the motherboard.
. Press the load lever with your

thumb (A), then move it to the

left (B) until it is released from

the retention tab.

A

B

Load lever

Retention tab

Advertising