Initiate graphic adapter [peg/pci, Igd graphics mode select [enabled, 32mb, Dvmt mode select [dvmt mode – Asus V4-P5G43 User Manual

Page 94: Protect audio video path mode [lite

Advertising
background image

5-22

Chapter 5: BIOS setup

Initiate Graphic Adapter [PEG/PCI]

Allows you to select the graphics controller as the primary boot device.

Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD][PEG/PCI]

IGD Graphics Mode Select [Enabled, 32MB]

Sets the IGD graphics mode.

Configuration options: [Disabled] [Enabled, 32MB] [Enabled, 64MB] [Enabled,

128MB]

DVMT Mode Select [DVMT Mode]

Allows you to select the graphics memory type.

Configuration options: [DVMT Mode]

DVMT Memory [256MB]

Configuration options: [128MB] [256MB] [Maximum DVMT]

This option only appears when installing 1GB DDR2 DIMMs into the DIMM

sockets.

Protect Audio Video Path Mode [Lite]

Allows you to set PAVP mode.

Configuration options: [Disabled] [Lite] [Paranoid]
To use the High-Bandwidth Digital Content Protection (HDCP) function, set this

option to either [Lite] or [Paranoid]. If you select Paranoid Mode, the system

reserves 96MB for playing and storing the decrypted contents. The operation

system and other programs cannot use this reserved memory, and Vista Aero

(DWM) is disabled.

Feature

PAVP Lite

PAVP Paranoid

Compressed video buffer is encrypted

Yes

Yes

HW 128-bit AES decryption

Yes

Yes

Protected memory (96MB reserved during boot)

No

Yes

Advertising