Asus P5N32-E SLI Plus - Manual (Page 56)

2-30 Chapter 2: Hardware information
6. CPU, chassis, power, and optional fan connectors
(4-pin CPU_FAN, 3-pin CHA_FAN1, 3-pin PWR_FAN, 3-pin OPT_FAN1~5)
The fan connectors support cooling fans of 1A~2.2A (26.4 W max.) at +12V.
Connect the fan cables to the fan connectors on the motherboard, making
sure that the black wire of each cable matches the ground pin of the
connector.
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air
flow inside the system may damage the motherboard components. These are
not jumpers! DO NOT place jumper caps on the fan connectors!
• Only the CHA_FAN1 and OPT_FAN 1~3 connectors support the ASUS
Q-FAN 2 feature.
• If you install two VGA cards, we recommend that you plug the rear chassis
fan cable to the motherboard connector labeled OPT_FAN1 or OPT_FAN2
for better themal environment.
P5N32-E SLI Plus
®
P5N32-E SLI Plus Fan connectors
CPU_FAN CHA_FAN1
CPU_FAN
PWR_FAN
GND
CPU F
AN PWR
CPU F
AN IN
CPU F
AN PWM
GND Rotation +12
V
OPT_FAN4
OPT_FAN5
PWR_FAN
GND Rotation +12
V
CHA_FAN1
OPT_FAN2
OPT_FAN1
OPT_FAN3
OPT_FAN3
GND
Rotation
+12V
OPT_FAN2
GND
Rotation
+12V
OPT_FAN1
GND
Rotation
+12
V
OPT_FAN4
GND Rotatio
n
+12
V
OPT_FAN5
GND
Rotatio
n
+12V