Asus F1A75-I DELUXE - Manual (Page 24)

F1A75-I DELUXE
F1A75-I DELUXE 240-pin DDR3 DIMM sockets
DIMMB
1
DIMMA
1
5. When the fan and heatsink assembly is in place, connect the CPU fan cable to the
connector on the motherboard labeled CPU_FAN.
• Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if
you fail to plug this connector.
• This connector is backward compatible with old 3-pin CPU fan.
F1A75-I DELUXE
F1A75-I DELUXE CPU fan connector
CPU_FAN
CPU
F
A
N PW
M
CPU F
AN IN
CPU
F
A
N PWR
GND
1.7 System memory
1.7.1 Overview
This motherboard comes with two Double Data Rate 3 (DDR3) Dual Inline Memory Modules
(DIMM) sockets. A DDR3 module has the same physical dimensions as a DDR2 DIMM but
is notched differently to prevent installation on a DDR2 DIMM socket. DDR3 modules are
developed for better performance with less power consumption. The figure illustrates the
location of the DDR3 DIMM sockets:
Channel Sockets
Channel A DIMM_A1
Channel B DIMM_B1
Chapter 1: Product introduction 1-12