Asus M2V - Manual (Page 113)

ASUS M2V 5-17
Delete Array
1. From the VIA RAID BIOS utility main menu, select Delete Array then
press <Enter>.
3. Press <Y> to confirm or <N> to return to the configuration options.
The selected array will be destroyed.
Are you sure? Continue? Press Y/N
10. Press <Y> to confirm or <N> to return to the configuration options.
11. Press <Esc> to go back to main menu.
Select Boot Array
1. From the VIA RAID BIOS utility main menu, select Select Boot Array
then press <Enter>.
2. From the list of channel used for IDE RAID arrays, press <Enter> to
select a RAID array for boot. After selection, the Status of the selected
array will change to Boot.
3. Press <ESC> to return to the menu items. Follow the same procedure
to deselect the the boot array.
2. From the list of channel used for IDE RAID arrays, press <Enter> to
select a RAID array to delete. The following confirmation message
appears.
Create Array
Delete Array
Create/Delete Spare
Select Boot Array
Serial Number View
VIA Tech. RAID BIOS Ver 1.xx
Create a RAID array with
the hard disks attached to
VIA RAID controller
F1 : View Array/Disk Status
↑,↓ : Move to next item
Enter : Confirm the selection
ESC : Exit
Channel Drive Name Array Name Mode Size(GB) Status
[ ]Serial_Ch0 Master XXXXXXXXXXX ARRAY 0 SATA 999.99 XXXXXXX
[ ]Serial_Ch1 Master XXXXXXXXXXX ARRAY 0 SATA 999.99 XXXXXXX