Asus V3-P5G31 - Manual (Page 85)

5-20 Chapter 5: BIOS setup
5.4.3 CPU Configuration
The items in this menu show the CPU-related information that the BIOS
automatically detects.
Options
Auto
MANUAL
CPU ratio adjustment [Auto]
Allows you to select the CPU ratio adjustment mode. Select [Manual] to set Ratio
CMOS Setting. Configuration options: [Auto] [Manual]
Ratio CMOS Setting [XX]
Sets the ratio between the CPU Core Clock and the Front Side Bus
frequency. The default value of this item is auto-detected by BIOS. Use the
<+> - <-> keys to adjust the BIOS.
C1E Support [Enabled]
Enables or disables Intel CPU Enhanced Halt (CE1) function, a CPU power-saving
function in system halt state. When enabled, the CPU core frequency and voltage
is reduced during system halt state to decrease power consumption.
Configuration options: [Disabled] [Enabled]
Max CPUID Value Limit [Disabled]
Allows you to determine whether to limit CPUID maximum value. Set this item to
[Disabled] for Windows XP operating system; set this item to [Enabled] for legacy
operating system such as Windows NT4.0 (Default: Disabled). Configuration
options: [Disabled] [Enabled]
Options
Configure advanced CPU settings
Module Version: 3C.0E
Manufacturer: Intel
Brand String: Intel(R) Core(TM)2 CPU 6300 @ 2.80GHz
Frequency : 1.86GHz
FSB Speed : 800MHz
Cache L1 : 32 KB
Cache L2 : 1066 KB
Ratio Status: Unlocked (Max:07, Min:06)
Ratio Actual Value: 7
CPUID : 6F2
CPU ratio Adjustment [Auto]
C1E Support [Enabled]
Max CPUID Value Limit: [Disabled]
Vanderpool Technology [Enabled]
CPU TM function: [Enabled]
Execute Disable Bit [Enabled]
PECI [Disabled]
Core Multi-Processing [Enabled]
Intel(R) SpeedStep(tm) tech. [Enabled]
will be emulated as Floppy and remaining as hard drive. Forced FDD option
can be used to force a HDD formatted drive to boost as FDD drive to boot
as FDD. Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk]
[CDROM]