Configure dram timing by spd [enabled, Initiate graphic adapter [peg/pci, South bridge configuration – Asus P5KPL User Manual

Page 72: Hd audio controller [azalia

Advertising
background image

2-24

Chapter 2: BIOS setup

North Bridge Configuration

Memory Remap Feature [Enabled]

Allows you to enable or disable the remapping of overlapped PCI memory above

the total physical memory. Configuration options: [Enabled] [Disabled]

Configure DRAM Timing by SPD [Enabled]

Allows you to enable or disable configurating DRAM Timing by SPD.

Configuration options: [Enabled] [Disabled]

North Bridge chipset Configuration

Memory Remap Feature

[Enabled]

Configure DRAM Timing by SPD

[Enabled]

Initiate Graphic Adapter

[PEG/PCI]

ENABLE: Allow

remapping of

overlapped PCI memory

above the total

physical memory.

DISABLE: Do not allow

remapping of memory

Initiate Graphic Adapter [PEG/PCI]

Allows you to select the graphics controller as the primary boot device.

Configuration options: [PCI/PEG] [PEG/PCI]

South Bridge Configuration

Options

South Bridge chipset Configuration

Audio Controller

[Azalia]

Front Panel Support Type

[HD Audio]

HD Audio Controller [Azalia]

Allows you to set the audio controller. Configuration options: [Azalia] [All Disabled]

Front Panel Support Type [HD Audio]

Allows you to select the front panel support type. If High Definition Audio

Front Panel used, please set HD Audio mode. Configuration options: [AC97]

[HD Audio]

Azalia

All Disabled

Advertising
This manual is related to the following products: