Asus P9X79-E WS - Manual (Page 110)

3-34 Chapter 3: BIOS setup
Restore AC Power Loss [Power Off]
[Power On] The system goes into on state after an AC power loss.
[Power Off] The system goes into off state after an AC power loss.
[Last State] The system goes into either off or on state, whatever the system
state was before the AC power loss.
Power On By PS/2 Keyboard [Disabled]
[Disabled] Disables the Power On by a PS/2 keyboard.
[Space Bar] Sets the Space Bar on the PS/2 keyboard to turn on the system.
[Ctrl-Esc] Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the
system.
[Power Key] Sets Power key on the PS/2 keyboard to turn on the system. This
feature requires an ATX power supply that provides at least 1A on
the +5VSB lead.
Power On By PCIE/PCI [Disabled]
[Disabled] Disables the PCIE devices from generating a wake event.
[Enabled] Enables the PCIE devices to generate a wake event.
Power On By Ring [Disabled]
[Disabled] Disables the Ring device from generating a wake event.
[Enabled] Enables the Ring device to generate a wake event.
Power On By RTC [Disabled]
[Disabled] Disables RTC from generating a wake event.
[Enabled] When set to [Enabled], the items RTC Alarm Date (Days) and
Hour/Minute/Second will become user-configurable with set
values. Use <+> and <-> keys to adjust the values.
ErP Ready [Disabled]
This item allows user to switch off some power at S5 to get the system ready for ErP
requirement. When set to Enabled, all other PME options will be switched off.
Configuration options: [Disabled] [Enabled in S5] [Enabled in S4 and S5]
3.5.7 APM