Asus CG8480 - Manual (Page 94)

9 Chapter 6: Using the utilities
EN
GL
IS
H
EN
GL
IS
H
EN
GL
IS
H
EN
GL
IS
H
Recovering.the.partition
This procedure allows you to delete the Intel
® Rapid Start Technology from your system, and
recover the partition you made for the Intel Rapid ® Start Technology installation.
Run the.Command.Prompt.tool.
Type diskpart and press Enter. 1.
.
The value “x” refers to a disk number where you want to delete the store partition.
. Tick On.in the Status field to enable the feature, and click Save.
Click.to.enable.or.
disable.battery.
saving.mode..This.
function.only.applies.
to.notebooks.
Select.and.click.to.enable.
or.disable.the.function
Click.to.enable.or.disable.the.timer..When.enabled,.move.
the.scroll.bar.to.the.desired.time..When.the.system.is.
idle.for.more.than.the.time.period.you.set,.the.system.
automatically.goes.into.the.Intel ® .Rapid.Start.mode..
Default.time.is.10.minutes.
Click.to.save.the.
settings.made.
Click.to.cancel.the.
settings.made.
At the diskpart prompt, type
list disk after DISKPART,
and press Enter.
.
Select the disk (SSD)
where the Intel ® Rapid Start
Technology is installed for
volume recovery, type select
disk x .(x = number), and
press Enter.
4.