Asus E500-CS - Manual (Page 19)

ASUS CUSI-FX User’s Manual 19
3. HARDWARE SETUP
Manual CPU Settings (NOTE: JumperFree mode must be disabled.)
Set the jumpers according to the internal speed of your processor as follows:
CPU SDRAM Frequency Selection Switches
(MHz) (MHz) JP3 JP1 JP2 JP0
66 100 [1-2] [1-2] [1-2] [1-2]
100 100 [1-2] [1-2] [1-2] [2-3]
150 100 [1-2] [2-3] [1-2] [1-2]
133 100 [1-2] [2-3] [1-2] [2-3]
100 133 [1-2] [1-2] [2-3] [2-3]
100 150 [1-2] [2-3] [2-3] [1-2]
133 133 [1-2] [2-3] [2-3] [2-3]
66 66 [2-3] [1-2] [1-2] [1-2]
97 97 [2-3] [1-2] [1-2] [2-3]
70 105 [2-3] [2-3] [1-2] [1-2]
95 95 [2-3] [2-3] [1-2] [2-3]
95 126 [2-3] [1-2] [2-3] [1-2]
112 112 [2-3] [1-2] [2-3] [2-3]
97 129 [2-3] [2-3] [2-3] [1-2]
96 96 [2-3] [2-3] [2-3] [2-3]
For updated processor settings, visit ASUS’s web site (see ASUS CONTACT IN-
FORMATION).
WARNING! Premature wearing of the processor may result when overclocking.
Be sure that the DIMM you use can handle the specified SDRAM MHz or else
bootup will not be possible.
Motherboard Settings
3. H/W SETUP